Omron fh-3 series User Manual

EC Circle SearchFH/FZ5 Processing Item Function Reference Manual
151
2
Inspecting and Measuring
For monochrome cameras:
For a monochrome camera only, the circle
color parameters are displayed.
4 Set up the judgement condition.
5 Perform the display setting if required.
Setting item
Set value
[Factory default]
Description
Circle brightness
•[Both]
•White
•Black
This sets the circle color with the brightness.
• The values beside each item are measurement results of the
displayed image. Take these values into
consideration to determine the upper and lower limits.
Setting item Set value Description
Measure pos X -99999.9999 to 99999.9999
Specify the range of X-axis shifting that is judged to be
OK.
Measure pos Y -99999.9999 to 99999.9999
Specify the range of Y-axis shifting that is judged to be
OK.
Evaluation 0 to 100
Specify the range of circle evaluated values that are
jud
ged
to be OK.
Radius 0 to 99999.9999 Set the range of radiuses that is judged to be OK.
Search count 0 to 256 Specify the range of quantities that is judged to be OK.
Setting item Set value [Factory default] Description
Display parameter
• [None]
•Radius
• Evaluation
Select the type of measurement result to display on the
image. T
he display setting applies only to the settings
dialog box.
Note

Omron fh-3 series Specifications

General

Brand	Omron
Model	fh-3 series
Category	Accessories
Language	English