Omron fh-3 series - Data Output

Data Output
870
FH/FZ5 Processing Item Function Reference Manual
Data Output
Used in the Following Case
• Output data to the external devices such as programmable controller and PC with the no-
order mode via the serial interface. With serial data output, output starts immediately after the
end of processing of serial data output in the flow.
Reference: The settings for the serial data output, refer to "Chapter 2 Methods for Connecting and
Communicating with External Devices" in the "Vision System FH/FZ5 Series User's Manual for Communications
Settings (Z342)"
Serial I/F
PLC
Controller
PC
The output data include measured values and operational results, etc.