Omron fh-3 series User Manual

2
FH/FZ5 Processing Item Function Reference Manual
Conventions Used in This Manual
Symbols
The symbols used in this manual have the following meanings.
Use of Quotation Marks and Brackets
In this manual, menus and other items are indicated as follows.
Vision System FH/FZ5
Series User’s Manual
Z365
FH-1
FH-1-
FH-3
FH-3-
FH-L
FH-L-
FZ5-L35
FZ5-L35-
FZ5-6
FZ5-6-
FZ5-11
FZ5-11-
When User want to know how
to setup the Sensor Controller
of the Vision System FH/FZ5
series.
Describes the soft functions, setup,
and operations to use Sensor
Controller of the Vision System FH/
FZ5 series.
Vision System FH/FZ5
series Hardware Setup
Manual
Z366
When User want to know
about the Hard-ware
specifications or to setup the
Sensor Controller of the
Vision System FH/FZ5
series.
Describes FH/FZ5 series
specifications, dimensions, part
names, I/O information, installation
information, and wiring information.
Vision System FH/FZ5
series Macro Customize
Functions Programming
Manual
Z367
When User operate or
programming using Macro
Customise functions.
Describes the functions, settings,
and operations for using Macro
Customize function of the FH/FH5-
series.
Vision System FH/FZ5
series Processing Item
Function Reference
Manual
Z341
When User confirm the details
of each processing items at
the create the measurement
flow or operate it.
Describes the software functions,
settings, and operations for using
FH/FH5-series.
Vision System FH/FZ5
Series User’s Manual
for Communications
Settings
Z342
When User confirm the
setting of communication
functions.
Describes the functions, settings,
and communications methods for
communicating between FH/FH5
series.
The following communication
protocol are described.
Parallel, PLC Link, EtherNet/IP,
EtherCAT, and Non-procedure
Vision System FH
Series Operation
Manual for Sysmac
Studio
Z343
FH-1
FH-1-
FH-3
FH-3-
When User connect to NJ
series via EtherCAT
communication.
Describes the operating
procedures for setting up and
operating FH series Vision Sensors
from the Sysmac Studio FH Tools.
Indicates relevant operational precautions that must be followed.
Indicates operation-related suggestions from OMRON.
[ ] Menu Indicates the menu names or processing items shown in the menu bar.
" " Item name Indicates the item names displayed on the screen.
Name of Manual Man.No. Model Proposes Contents
Important
Note

Omron fh-3 series Specifications

General

Brand	Omron
Model	fh-3 series
Category	Accessories
Language	English