LabelingFH/FZ5 Processing Item Function Reference Manual
331
2
Inspecting and Measuring
Labeling
You can count the number of labels with a specified color or find the area and center of gravity of a specified
label number.
Used in the Following Case
• Label count inspection
• Processing is different for color images and monochrome images. If the camera type, color camera, or monochrome
camera, was changed from a previous setup, a reset of some settings may be needed.
Specified color Measurement region
The extracted labels are sorted by area or gravity center
and re-numbered.
Examination is based on the number and the area of labels in the measurement region.
Label
01 2