Date Verification
408
FH/FZ5 Processing Item Function Reference Manual
Code file format
• The first line shows the "Code".
• The second line shows the "Flag". Input
"1" when used.
• The third line and subsequent lines contain codes for each number.
Months and days start from "1".
Reading code files
1 In the Item Tab area, click [Code parameter].
2 In the "Code file" area, click [Load code
file].
3 In the file selection window, select the code file (in CSV format) to read and click [OK].
The code file is read and the content is displayed in the window.
Output Parameters (Date Verification)
Specifies whether or not the judgement results of this processing unit is reflected in the scene overall judgement.
1 Click [Output parameter] in the Item Tab area.
2 Choose whether or not to reflect this in the scene overall judgement in "Reflect to overall
judgement" area.
Setting item
Set value
[Factory default]
Description
Reflect to overall
judgemen
t
•[ON]
•OFF
Enables choosing whether or not the judgement results of this processing
unit is reflected in the scene overall judgement.
To Next Page
Loading...
Need help?
General
