Date Verification
402
FH/FZ5 Processing Item Function Reference Manual
List of Date Verification Items
Verification Parameters (Date Verification)
This item sets the verification target and the verification source character string.
The character string read in Character Inspection is
the target for verification.
1 In the Item Tab area, click [Verification].
2 This item sets the general OCR unit for
verification.
3 In the "Target string setting" area, click
[...] for "Target string expression".
The String setting dialog is displayed.
4 This item sets the character string that is
the source for verification.
Input the date format and the preceding and
following character strings.
Item name Description
Verification
This item sets parameters of
the verification string.
Reference: Verification Parameters (Date Verification) (p.402)
Date parameter
This item sets the date/time format and update conditions.
Reference: Date Parameters (Date V
e
rification) (p.404)
Code parameter
Set this to print the date encrypted in such a way that
it is difficult for the user to recognize. Setting what
codes show also makes possible automatic updating.
Reference: Code Parameters (Date Verification) (p.406)
Output
p
a
rameter
This item can be changed if necessary. Normally, the factory default value will be used.
Use the output parameter to specify how to handle the coordinates.
Reference: Output Parameters (Date V
erification) (p.408)
• Always set Character Inspection in a unit before the Date Verification unit.
To Next Page
Loading...
Need help?
General
