Date Verification
406
FH/FZ5 Processing Item Function Reference Manual
Code Parameters (Date Verification)
Preset what the codes show so that date verification is possible even when printing the date encrypted in such a
way that it is difficult for the user to recognize.
The setting methods are to set on the screen or set with a PC.
Setting on the Screen
This describes the setting method, using an example in which October is encrypted as X.
1 In the Item Tab area, click [Code parameter].
2 Place a check at "Code month 1 flag".
3 Place a check at "Code month 1" in the
"Code detail setting" area.
4 Click [...] for "10".
The software keyboard is displayed. Input "X".
• If a usage period is set, encrypted characters cannot be used for character verification.
Code month 1 and code month 2
• Set up code files for 2 patterns in order to be ready for setup chan
ges. Select a check at the one to use.
To Next Page
Loading...
