Image Logging
676
FH/FZ5 Processing Item Function Reference Manual
Save Destination (Image Logging)
1 Click [Destination] in the Item Tab area.
2 Set the logging images save destination.
Enabled when "Save to memory + file" is
selected as the save destination in the system
image logging settings.
3 Set the File count in folder, if necessary.
Saving a large number of files in the [Save
Destination] sub-folder does degrade performance
and visibility.
Therefore, you can create more folders within sub-
folders
to prevent performance and v
isibility loss.
• The save file name is the prefix and measurement ID.
Reference: Output Format (Data Logging) (p.685)
Setting item
Set value
[Factory default]
Description
Sub folder name -
Designates sub folder names. Creates a sub folder in the save
destination in system logging settings. (
Max: 32 characters)
The following characters cannot be set.
\ / : * ? " < > |
Prefix -
Sets the prefix for the save file name. (Max: 31 characters)
The set character string is added at the beginning of the name of
the save file.
If the system logging settings designate a prefix, the file nam
e
is
set to [prefix designated by image logging] + [prefix designated by
system logging settings] + image logging file name.
Setting item
Set value
[Factory default]
Description
File count in folder
0 to 999
[200]
• Set the upper limit for the number of
files in folders automatically
generated in the [Save Destination] folder.
The number of files is not the nu
mber
of files stored in the
automatically generated folder but the total number of generated
image files.
• The name of the folder to be automatically generated will be the
same as th
at of the first image logging file to be stored in that
folder. Furthermore, if 0 is specified, folders are not
automatically generated.
• When the number of files in the folder is other than 0, i
n the following cases, the number of files saved in the
folder generated in the sub-folder may be less than the number of files in the folder.
:When you execute the Clear measurement result function fro
m
the main screen menu, folders are automatically
generated in the sub-folder regardless of the setting of the number of files in the folder.
Reference: Clearing Measurement Results" in the "Vision System FH/FZ5 Series User's Manual (Z365)"
: When folder distribution is set in [Logging s
etting] of [System setting], folders are automatically generated in the
sub-folder according to the total number of generated image files.
Reference: "Logging Conditions" in the "Vision System
F
H/FZ5 Series User's Manual (Z365)"
To Next Page
Loading...
Need help?
General
