Trend MonitorFH/FZ5 Processing Item Function Reference Manual
663
4
Support Inspection and Measurement
Measurement Value (Trend Monitor)
Select the measurement value to be viewed on the trend monitor.
One item can be displayed for each trend monitor unit.
1 Click [Measurement] in the Item Tab area.
2 In the "Expression" area, click [...] in
"Measurement data", and measurement
values to be monitored are set up using
an expression.
The Setting Expression window is displayed.
Select a unit number processed before [Trend
Monitor
]. Even if the unit number after [Trend
Monitor] is selected, the graph will not display.
3 Set up number of items to save as
necessary.
Output
parameter
This item can be changed if necessary. Normally, the factory default value will be used.
Specify whether to reflect the judgement result to
the overall judgement of the scene.
Reference: Output Parameters (Trend Monitor) (p.670)
Setting item Set value Description
Number of saving
• [1000]
• 5000
• 10000
• 50000
• 100000
Set the number of measurement values to save.
A maximum of 5000 items can be displayed on the main screen.
Measurements that exceed 5000 items are displayed using
to
g
gling of pages.
• Trade offs between number of items saved and the sensor controlle
r performance include the following.
• There is a difference in amount of memory used of approximately 2 MB between 1000 items and 100000 items.
Please confirm the amount of memory remaining prior to performing set up.
Item name Description
Important
To Next Page
Loading...
Need help?
General
