Omron fh-3 series - Region Setting (Stripes Removal Filter II); Test Measurement (Stripes Removal Filter II)

Stripes Removal Filter II
538
FH/FZ5 Processing Item Function Reference Manual
Correction method: For "Pinstripe off"
Region Setting (Stripes Removal Filter II)
It is possible to target the entire screen, but restricting the range can shorten the processing time.
1 In the Item Tab area, click [Region setting].
2 Use the drawing tools to specify the measurement region.
3 Click [OK] in the Figure setting area.
• [OK]: Changes the settings and returns to the previous menu.
• [Cancel]: Changes are discarded. R
eturns to the previous menu.
• [Apply]: Updates the settings without leaving edit window.
Test Measurement (Stripes Removal Filter II)
The image specified in the Sub-image number in image display setting is displayed in the image display area.
Setting item
Setting value
[Factory default]
Description
Stripe brightness
• [Light and darkness]
• Light
• Darkness
This item selects the color of th
e stripes to be deleted.
Sub image No. Explanation of image to be displayed
0 Filtered image