Omron fh-3 series User Manual

OCR
470
FH/FZ5 Processing Item Function Reference Manual
2 In the Select Line (line selection) area, set a value for each item.
3 In the period setting area, set a value for each item.
4 In the date setting area, set a value for each item.
5 In the common setting area, set a value for each item.
Setting item
Setting value
[Factory default]
Description
Select Line
•[Line No.1]
• Line No.2
• Line No.3
• Line No.4
Set the line to which the usage period that will be set in the
sub
s
equent step applies.
Setting item
Setting value
[Factory default]
Description
Yea r 0 to 99 [0] Set the usage period from the current date.
Month 0 to 99 [0] Set the usage period from the current date.
Day -999 to 999 [0] Set the usage period from the current date.
Setting item
Setting value
[Factory default]
Description
Zero suppress
• [0]
•Space
Set the display method for the 10's digit when the month or day is
a one-digit number.
Calculation order
• [MonthDay]
•DayMonth
Set whether calculation starts from the month or the day when a
usa
ge period is set.
The usage expiration date varies depending on the order of
cal
c
ulation, such as when the usage period spans a month that
has 31 days and a month that has 30 days. Select this setting
based on the calculation method used for the usage expiration
date.
Month end adjust
• [Last day of current
month]
• First day of next month
• Gap day of next month
Select the adjustment method to be used when a non-existent
mon
th and day result from calculation of the usage expiration
date.
Select this setting based on your actual mana
gement procedure.
Example: January 31, usage expi
ration date is one month
“Last day of current month” = February 28
“First day of next month” = March 1
“Gap day of next month” = March 3
Setting item
Setting value
[Factory default]
Description
Auto Update
• Not update
• First measure
• [Always update]
Select the condition for updating the date. The time is always
up
dated.
• Not update
The date is not automatically updated. Update the date using
the menu.
• First measure
The date is updated at the first measu
rement after the sensor
controller is started up. When the controller is not kept running
more than one day, the date is updated the first time
measurement is performed after the controller is started up
following a change of date.
• [Always update]
The date is updated when measurement is performed. When the
controller is kept running more than one day, the date is updated
the first time measurement is performed after the date changes.

Omron fh-3 series Specifications

General

Brand	Omron
Model	fh-3 series
Category	Accessories
Language	English