Camera Image Input FH
48
FH/FZ5 Processing Item Function Reference Manual
3 Specify the camera gain while checking
the image.
Item
Setting value
[Factory default]
Description
Gain
• FZ-SC/S/SHC/SH
0 to 230 [85]
• FZ-SC2M/S2M/SC5M2/S5M2/SF□/SP□
0 to 230 [50]
•FZ-SQ□□□□
16 to 64 [16]
• FH-SC02/SM02/SC04/SM04/SC12/SM12
0 to 255 [0]
• FH-SC05R/SM05R
0 to 63 [0]
Adjust the camera gain when the shutter speed, the
le
ns aperture, and
lighting conditions cannot be used
to brighten the image.
Usually, the factory default value can be used.
• When an Intelligent Compact Digital camera, FZ-SQ□□
â–¡â–¡, is
connected, we recommend setting the gain value to 16 for
stable operations. Measurement values may be different if the recommended value is exceeded.
Be sure to thoroughly check the measurement result and set the gain value.
• Due to the specification of its imaging elements, a CMOS camera gen
erates stripe noises when the gain setting of the
camera is raised. You may also find multiple defective pixels, but they do not represent a defect or failure of the product
in any way. If stripe noises and defective pixels affect the measurement results, lower the gain setting of the camera or
use a CCD camera.
To Next Page
Loading...
Need help?
General
