Omron fh-3 series User Manual

Panorama
610
FH/FZ5 Processing Item Function Reference Manual
4 Set a camera number for each camera allotment number.
The camera allotment numbers indicate the positions where the cameras are placed in the camera
arrangement, and are fixed.
Assign the desired camera number to the camera allotment number.
5 Set the camera arrangement.
Setting item
Setting
[factory default]
Description
Camera number
Camera allotment
numbe
r 0
•
0 to 7 [0]
Camera allotment
numbe
r 1
• 0 to 7 [1]
Camera allotment
numbe
r 2
• 0 to 7 [2]
Camera allotment
numbe
r 3
• 0 to 7 [3]
Set the desired camera number for the camera allotment number.
Setting item
Set value
[Factory default]
Description
Arrangement
• [One line]
• Two line
Set the camera image placement. The camera allotment numbers
are
placed as shown below, and are fixed.
• If the configuration of the connected camera is changed, the measurement result is NG (incompatible image).
Press the initialize button and re-do the settings.
• Do not set [Camera Image Input] or [Camera Image Inpu
t HDR] af
ter [Panorama].
(one line) Camera arrangement
Camera
allotment
number 0
Camera
allotment
number 1
Camera
allotment
number 2
Camera
allotment
number 3
(two line) Camera arrangement
Camera
allotment
number 0
Camera
allotment
number 2
Camera
allotment
number 1
Camera
allotment
number 3
Important

Omron fh-3 series Specifications

General

Brand	Omron
Model	fh-3 series
Category	Accessories
Language	English