Position Data CalculationFH/FZ5 Processing Item Function Reference Manual
715
4
Support Inspection and Measurement
4 Set the position information of Points 0 to 3 as needed.
5 If the setting has been changed, click
[Measure] to check the calculation
result.
6 Set up the judgement condition.
Data necessary for angle data (ï‚¡: data needed to be entered)
Angle calculation
method selection
Point 0 Point 1 Point 2 Point 3
Position
XY
Angle
Position
XY
Angle
Position
XY
Angle
Position
XY
Angle
Point 0 ï‚¡
Point 1 ï‚¡
Point 2 ï‚¡
Point 3 ï‚¡
Side line formed by
Point
s 0-1
ï‚¡ ï‚¡
Side
line formed by
Point
s 0-2
ï‚¡ ï‚¡
Side line formed by
Point
s 0-3
ï‚¡ ï‚¡
Side
line formed by
Point
s 1-0
ï‚¡ ï‚¡
Side line formed by
Point
s 1-2
ï‚¡ ï‚¡
Side line formed by
Point
s 1-3
ï‚¡ ï‚¡
Side
line formed by
Point
s 2-0
ï‚¡ ï‚¡
Side line formed by
Point
s 2-1
ï‚¡ ï‚¡
Side line formed by
Point
s 2-3
ï‚¡ ï‚¡
Side
line formed by
Point
s 3-0
ï‚¡ ï‚¡
Side line formed by
Point
s 3-1
ï‚¡ ï‚¡
Side line formed by
Point
s 3-2
ï‚¡ ï‚¡
Setting item
Setting value
[Factory default]
Description
Calculate position X -99999.9999 to 99999.9999
Specify the range of X-axis calculati
on positions that is
judged to be OK.
Calculate position Y -99999.9999 to 99999.9999
Specify the range of Y-axis calculation positions that is
ju
dge
d to be OK.
Calculate angle -180.0000 to 180.0000
Specify the range of calculation
angles that is judged to
be OK.