Omron fh-3 series User Manual

Calc Axis MoveFH/FZ5 Processing Item Function Reference Manual
793
4
Support Inspection and Measurement
: Show, : Hide
Key Points for Adjustment
Select the adjustment method referring to the following points.
When the measurement results are false
Other
θ axis angle movement 

(θ axis
direct
drive
)

(
θ axis
direct
drive)
  

(θ axis
direct
drive
)

(θ axis
direct
drive)
 
θ a
xis linear movement 

(θ axis
linea
r
drive)

(θ axi
s
linear
drive)
  

(θ axis
li
near
drive)

(θ axi
s
linear
drive)
 
U axis movement          
V axis movement          
W axis movement          
R axis movement          
State
Parameter to be
adjusted
Troubleshooting
The sign of the
measurement result
(positive/negative) output is
opposite.
-
The reference position/angle and measurement position/angle may
b
e set in reverse. The axis movement amount calculates the
movement amount from the measurement position/angle to the
reference position/angle.
State
Parameter to be
adjusted
Troubleshooting
The reference unit number
is <"None">
and cannot be
selected.
Machine setting
Check if the reference scene number is selected correctly. Check if
stage data processing items or robot data processing items are
registered in the selected reference scene.
The reference unit number
does not fo
llo
w during flow
editing.
Machine setting
The system is designed this way.
While a scene other than the current sce
ne is referenced, the
reference unit number does not change according to the editing of
the flow. Change the flow so that it refers to from the current scene
or set the reference unit number again.
Displayed content XY XYθ θXY UVW UVWR X(Y) Xθ(Yθ) θX(θY) 3 axes 4 axes

Omron fh-3 series Specifications

General

Brand	Omron
Model	fh-3 series
Category	Accessories
Language	English