Omron fh-3 series User Manual

Character InspectionFH/FZ5 Processing Item Function Reference Manual
397
2
Inspecting and Measuring
Output of Character string with Non-procedure Communications
Check the [Character output] in Output parameter to output the character string with Non-procedure
communication.
Reference: Output Parameters (Character Inspection) (p.394)
1 Output Format
Take the following case as an example. Number of measurement is one.
Reading character string is 32. Command, Response, and Data Output area are
Reference: Non-procedure Communications and MEASURE
or M in Non-procedure Command Details
in
Vision System FH/FZ5 Series User’s Manual for Communications Settings (Z342).
Command (PLC to Sensor Controller)
Response (Sensor Controller to PLC)
• If no character string, refer to the following.
MUAES E
RM
or
C
R
C
R
0123456789…UV(Character string data)
C
R
O
C
R
K
Note
O
C
R
K
C
R

Omron fh-3 series Specifications

General

Brand	Omron
Model	fh-3 series
Category	Accessories
Language	English