Advanced FilterFH/FZ5 Processing Item Function Reference Manual
587
3
Compensate image
Changing the 2 Images Operation Settings
You can change the settings for the filter that operates on paired pixel values of two images.
Setting item
Setting value
[Factory default]
Description
Operation type
• [Calculation]
• Bit operation
Set the type of operation that is used for 2 images operation.
Operation mode
•[Add]
• Subtraction
• Subtraction
(absol
ute)
•
Multiplication
• Multiplication
(Normalization)
•Average
• Maximum
• Minimum
This can be set when “Calculation” is selected for “Operation type”.
Set the operation method.
Operation mode
•[AND]
•OR
•XOR
•NAND
•NOR
•XNOR
This can be set when “Bit operation” is selected for “Operation type”.
Set the operation method for bit operation.
To Next Page
Loading...
Need help?
General
