Omron fh-3 series - Page 36

Camera Image Input
34
FH/FZ5 Processing Item Function Reference Manual
Camera-mount Lighting Controller FLV-TCC3HB is connected:
Item Set value Description
On all the time
• Checked
•[Unchecked]
Place a check here to keep the light turned ON
all of the time regardless of the
exposure time.
Modulate mode
•[Duty]
• Voltage /
Curre
nt
Select the lighting adjustment method.
0ch connected:
•Duty
The brightness of the light is adjusted with
255 levels of the pulse width (PWM
frequency: 100kHz).
• Voltage / Current
The brightness of the light is adjusted
with 255 voltage / current levels.
0ch is the channel for the spot lighting.
1ch / 2ch connected:
•Duty
The brightness of the light is adjusted with
255 levels of the pulse width (PWM
frequency: 100kHz).
• Voltage / Current
The brightness of the light is adjusted
with 255 voltage / current levels.
Select voltage / current adjustment if you will use a high-speed shutter speed.
Part
0 to 255
[128]
Set the brightness for the selected parts.