Camera Image InputFH/FZ5 Processing Item Function Reference Manual
41
1
Input image
6 Click [Sampling measurement].
Measurement is performed.
The search result (cross-shaped cu
rsor) is
displayed in the Image Display area, and the
Sampling Coordinate window is displayed.
7 In the Sampling Coordinate window,
enter the X and Y values.
8 Click [OK].
Point coordinates and actual coordinates are
registered in the "Sampling" area.
9 Move the object to be measured and repeat the Steps Reference: 3 (p.40) to Reference: 8
(p.41).
10 Click [Generate calibration parameters].
The calibration parameters will be generated.
To Next Page
Loading...
