Advanced Filter
584
FH/FZ5 Processing Item Function Reference Manual
Changing the Custom Rank Filter Settings
You can change the rank filter settings that allow you to set custom filter coefficients.
Setting item
Setting value
[Factory default]
Description
Count 1 to 9 [1] Set the number of times the filter is applied.
Mask size
3×3 to 21×21
[3×3]
Set an odd value for the size of the filter mask.
If there are large variations in the brightness of peripheral pixels, increase the
“Mask size” setting.
Mode
• [Dilate]
•Erosion
Set the filter mode.
Set all
•Checked
• [Unchecked]
To set all filter values at once, sele
ct the “Set
all” checkbox.
Filter Coefficient 0 to 1 [1]
Set the dilate/erosion shape used for masking.
Set a number of filter coefficients that is equal to the mask size.
To Next Page
Loading...
Need help?
General
