2 Parameters
2.4 Parameters for write protection and know-how protection
SINAMICS G130/G150
1090 List Manual (LH2), 07/2016, A5E03263479A
p2007 Reference acceleration / a_ref
p2030 Field bus int protocol selection / Field bus protocol
p2038 IF1 PROFIdrive STW/ZSW interface mode / PD STW/ZSW IF mode
p2079 IF1 PROFIdrive PZD telegram selection extended / IF1 PZD telegr ext
p4956[0...n] TEC DO-specific activation / TEC DO act
p7763 KHP OEM exception list number of indices for p7764 / KHP OEM qty p7764
p7764[0...n] KHP OEM exception list / KHP OEM excep list
p7852 Number of indices for r7853 / Qty indices r7853
p8836 SINAMICS link node address / Node address
p8870[0...15] SINAMICS Link PZD receive word / PZD recv word
p8870[0...31] SINAMICS Link PZD receive word / PZD recv word
p8871[0...15] SINAMICS Link PZD send word / PZD send word
p8871[0...31] SINAMICS Link PZD send word / PZD send word
p8872[0...15] SINAMICS Link PZD receive address / PZD recv adr.
p8872[0...31] SINAMICS Link PZD receive address / PZD recv adr.
p9500 SI Motion monitoring clock cycle (Control Unit) / SI Mtn clock CU
p9601 SI enable functions integrated in the drive (Control Unit) / SI enable fct CU
p9810 SI PROFIsafe address (Motor Module) / SI PROFIsafe MM
p9902 Target topology number of indices / TargetTopo indices
To Next Page
Loading...
