Siemens G130 - r0107 Drive object type; DO type

SINAMICS G130/G150
List Manual (LH2), 07/2016, A5E03263479A
79
2 Parameters
2.2 List of parameters
Description: Displays the type of each drive object.
Value: 207: TM120 (Terminal Module)
Dependency: Refer to: p0103, r0103
Description: Displays the type of each drive object.
Value: 208: TM150 (Terminal Module)
Dependency: Refer to: p0103, r0103
Description: Displays the type of each drive object.
Value: 200: TM31 (Terminal Module)
Dependency: Refer to: p0103, r0103
Description: Displays the type of each drive object.
Value: 100: TB30 (Terminal Board)
Dependency: Refer to: p0103, r0103
r0107 Drive object type / DO type
TM120 Can be changed: - Calculated: - Access level: 2
Data type: Integer16 Dyn. index: - Func. diagram: -
P-Group: Closed-loop control Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
207 207 -
r0107 Drive object type / DO type
TM150 Can be changed: - Calculated: - Access level: 2
Data type: Integer16 Dyn. index: - Func. diagram: -
P-Group: Closed-loop control Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
208 208 -
r0107 Drive object type / DO type
TM31 Can be changed: - Calculated: - Access level: 2
Data type: Integer16 Dyn. index: - Func. diagram: -
P-Group: Closed-loop control Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
200 200 -
r0107 Drive object type / DO type
TB30 Can be changed: - Calculated: - Access level: 2
Data type: Integer16 Dyn. index: - Func. diagram: -
P-Group: Closed-loop control Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
100 100 -