Fig. 3-17 2382 – States
- 2382 -
Function diagram
87654321
fp_2382_56_eng.vsd
DO: B_INF, VECTOR
SINAMICS G130/G150
04.03.14 V04.08.00
PROFIenergy - States
Background
Pe active
r5613.0
Pe inactive
r5613.1
A08800
"PROFIenergy energy
-saving mode active"
Pe mode ID
r5600
1
&
&
&
1
PROFIenergy Power OFF
1
&
Inhibit PROFIenergycontrol commands
p5611.0
Trans into energy-saving mode
from PROFIdrive state S4 poss
p5611.2
Drive initiates OFF1 when tran-
sitioning to energy-saving mode
p5611.1
(0)
Pe sw on_inh s_src
p5614
POWER ON
PROFIdrive state
&
S4: Operation
ZSWA.00/01/02 = 1
ZSWA.11 = 1
ZSWA.06 = 0
Pulses enabled
Controller enabled
No jog operation: Setpoints enabled
S3: Ready
ZSWA.00/01 = 1, ZSWA.11 = 0
ZSWA.02/06 = 0
Line contactor is CLOSED
Wait for precharging
S2: Ready for switching on
ZSWA.00 = 1, ZSWA.11 = 0
Main contactor is OPEN
Wait for power up or jog
S1: Switching on inhibited
ZSWA.06 = 1, ZSWA.11 = 0
ZSWA.00/01/02 = 0
Pulses inhibited
PROFIenergy state
PROFIenergy ready to operate
operate
PROFIenergy energy-saving mode 2
To Next Page
Loading...
