Siemens G130 - r4790[0...1] Trace data type 5 traced; Trace rec type 5; r4791[0...1] Trace data type 6 traced; Trace rec type 6; r4792[0...1] Trace data type 7 traced; Trace rec type 7; r4793[0...1] Trace data type 8 traced; Trace rec type 8

2 Parameters
2.2 List of parameters
SINAMICS G130/G150
720 List Manual (LH2), 07/2016, A5E03263479A
Description: Displays the recorded data type 5 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Description: Displays the recorded data type 6 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Description: Displays the recorded data type 7 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Description: Displays the recorded data type 8 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Description: Changes over the memory bank to read out the contents of the trace buffer.
Dependency: Refer to: r4740, r4741, r4742, r4743, r4750, r4751, r4752, r4753
r4790[0...1] Trace data type 5 traced / Trace rec type 5
CU_G130_PN,
CU_G150_PN,
CU_G130_DP,
CU_G150_DP
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4791[0...1] Trace data type 6 traced / Trace rec type 6
CU_G130_PN,
CU_G150_PN,
CU_G130_DP,
CU_G150_DP
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4792[0...1] Trace data type 7 traced / Trace rec type 7
CU_G130_PN,
CU_G150_PN,
CU_G130_DP,
CU_G150_DP
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4793[0...1] Trace data type 8 traced / Trace rec type 8
CU_G130_PN,
CU_G150_PN,
CU_G130_DP,
CU_G150_DP
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
p4795 Trace memory bank changeover / Trace mem changeov
CU_G130_PN,
CU_G150_PN,
CU_G130_DP,
CU_G150_DP
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0 500 0