Siemens G130 - r2053[0...11] IF1 PROFIdrive diagnostics PZD send word; IF1 diag send word

To Next Page

To Previous Page

2 Parameters

2.2 List of parameters

SINAMICS G130/G150

510 List Manual (LH2), 07/2016, A5E03263479A

Note: IF1: Interface 1

Description: Displays the PZD (actual values) with word format sent to the fieldbus controller.

Index: [0] = PZD 1

[1] = PZD 2

[2] = PZD 3

[3] = PZD 4

[4] = PZD 5

[5] = PZD 6

[6] = PZD 7

[7] = PZD 8

[8] = PZD 9

[9] = PZD 10

[10] = PZD 11

[11] = PZD 12

Dependency: Refer to: p2051, p2061

Note: IF1: Interface 1

08 Bit 8 ON OFF -

09 Bit 9 ON OFF -

10 Bit 10 ON OFF -

11 Bit 11 ON OFF -

12 Bit 12 ON OFF -

13 Bit 13 ON OFF -

14 Bit 14 ON OFF -

15 Bit 15 ON OFF -

r2053[0...11] IF1 PROFIdrive diagnostics PZD send word / IF1 diag send word

ENC Can be changed: - Calculated: - Access level: 3

Data type: Unsigned16 Dyn. index: - Func. diagram: 2450, 2470

P-Group: Communications Unit group: - Unit selection: -

Not for motor type: - Scaling: - Expert list: 1

Min Max Factory setting

- - -

Bit field: Bit Signal name 1 signal 0 signal FP

00 Bit 0 ON OFF -

01 Bit 1 ON OFF -

02 Bit 2 ON OFF -

03 Bit 3 ON OFF -

04 Bit 4 ON OFF -

05 Bit 5 ON OFF -

06 Bit 6 ON OFF -

07 Bit 7 ON OFF -