SINAMICS G130/G150
List Manual (LH2), 07/2016, A5E03263479A
697
2 Parameters
2.2 List of parameters
Description: Display and connector output for the identified incorrect pulses in lines.
Also see p0437.7 (do not accumulate number of incorrect pulses).
Index: [0] = Encoder 1
[1] = Encoder 2
[2] = Encoder 3
Dependency: Refer to: p0437, p4681, p4682, p4683, p4684
Note: The display can only be reset to zero.
Description: Display and connector output for the identified incorrect pulses in lines.
Also see p0437.7 (do not accumulate number of incorrect pulses).
Dependency: Refer to: p0437, p4681, p4682, p4683, p4684
Note: The display can only be reset to zero.
Description: Displays the encoder status according to PROFIdrive for a squarewave encoder.
Index: [0] = Encoder 1
[1] = Encoder 2
[2] = Encoder 3
Dependency: Refer to: A31422
Note: After alarm A3x422 is output, this parameter is set for 100 ms.
Description: Displays the encoder status according to PROFIdrive for a squarewave encoder.
Dependency: Refer to: A31422
Note: After alarm A3x422 is output, this parameter is set for 100 ms.
p4688[0...2] CO: Zero mark monitoring differential pulse count / ZM diff_pulse qty
VECTOR_G Can be changed: T Calculated: - Access level: 3
Data type: Integer32 Dyn. index: - Func. diagram: -
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
-2147483648 2147483647 0
p4688 CO: Zero mark monitoring differential pulse count / ZM diff_pulse qty
ENC Can be changed: T Calculated: - Access level: 3
Data type: Integer32 Dyn. index: - Func. diagram: -
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
-2147483648 2147483647 0
r4689[0...2] CO: Squarewave encoder diagnostics / Sq-wave enc diag
VECTOR_G Can be changed: - Calculated: - Access level: 4
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Encoder Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
r4689 CO: Squarewave encoder diagnostics / Sq-wave enc diag
ENC Can be changed: - Calculated: - Access level: 4
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Encoder Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
To Next Page
Loading...
