2 Parameters
2.2 List of parameters
SINAMICS G130/G150
734 List Manual (LH2), 07/2016, A5E03263479A
Description: Displays the total length of the IDs of all the Technology Extensions installed on the memory card/device memory.
Dependency: Refer to: r4985, r4987, r4988, r4989, r4990, r4991, r4992, r4993, r4994
Note: TEC: Technology Extension
The identifier of a Technology Extension comprises a maximum of 8 characters plus separator.
Description: Displays the total length of the GUIDs of all the Technology Extensions installed on the memory card/device memory.
Dependency: Refer to: r4985, r4986, r4988, r4989, r4990, r4991, r4992, r4993, r4994
Note: The GUID of a Technology Extension comprises 16 characters plus 1 character major information plus 1 character,
minor information.
GUID: Globally Unique IDentifier
TEC: Technology Extension
Description: Displays the IDs of all the Technology Extensions installed on the memory card/device memory.
r4988[0...8]: Identifier of Technology Extension 1
r4988[9...17]: Identifier of Technology Extension 2, ...
Dependency: Refer to: r4985, r4986, r4987, r4989, r4990, r4991, r4992, r4993, r4994
Notice: If there is no Technology Extension, then it is not possible to access an index.
Note: TEC: Technology Extension
Description: Displays the version of all the Technology Extensions installed on the memory card/device memory.
r4989[0]: Version of Technology Extension 1
r4989[1]: Version of Technology Extension 2, ...
Dependency: Refer to: r4985, r4986, r4987, r4988, r4990, r4991, r4992, r4993, r4994
Notice: If there is no Technology Extension, then it is not possible to access an index.
r4986 TEC identifier total length / TEC ident tot_l
CU_G130_PN,
CU_G150_PN,
CU_G130_DP,
CU_G150_DP
Can be changed: - Calculated: - Access level: 4
Data type: Unsigned16 Dyn. index: - Func. diagram: -
P-Group: OEM range Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
0 144 -
r4987 TEC GUID total length / TEC GUID tot_lgth
CU_G130_PN,
CU_G150_PN,
CU_G130_DP,
CU_G150_DP
Can be changed: - Calculated: - Access level: 4
Data type: Unsigned16 Dyn. index: - Func. diagram: -
P-Group: OEM range Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
0 288 -
r4988[0...n] TEC identifier / TEC ident
CU_G130_PN,
CU_G150_PN,
CU_G130_DP,
CU_G150_DP
Can be changed: - Calculated: - Access level: 4
Data type: Unsigned8 Dyn. index: r4986 Func. diagram: -
P-Group: OEM range Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
r4989[0...n] TEC version / TEC version
CU_G130_PN,
CU_G150_PN,
CU_G130_DP,
CU_G150_DP
Can be changed: - Calculated: - Access level: 4
Data type: Unsigned32 Dyn. index: r4985 Func. diagram: -
P-Group: OEM range Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
To Next Page
Loading...
