H3C S7500E Series

Command Manual – ARP
H3C S7500E Series Ethernet Switches Chapter 2 Proxy ARP Configuration Commands
2-3
2.1.4 display local-proxy-arp
Syntax
display local-proxy-arp [ interface Vlan-interface vlan-id ]
View
Any view
Parameters
interface vlan-interface vlan-id: Displays the local proxy ARP status of the VLAN
interface specified by the argument vlan-id.
Description
Use the display local-proxy-arp command to display the status of the local proxy
ARP.
Related commands: local-proxy-arp enable.
Examples
# Display the status of the local proxy ARP on VLAN-interface 2.
<Sysname> display local-proxy-arp interface vlan-interface 2
Interface Vlan-interface2
Local Proxy ARP status: enabled