Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 4 IS-IS Configuration Commands
4-8
lsp-max-age: 1200
lsp-refresh: 900
Interval between SPFs: 10
Table 4-1 Description on the fields of the display isis brief command
Field Description
network-entity Network entity name
is-level IS-IS Routing level
cost-style Cost style
preference Preference
Lsp-length receive Maximum LSP that can be received
Lsp-length originate Maximum LSP that can be generated
Timers Timers
spf-slice-size
Time of each SPF calculation slice (0 means SPF
calculation time is not split.)
lsp-max-age Maximum life period of LSP
lsp-refresh Refresh period of LSP
Interval between SPFs Interval between SPF calculations
4.1.8 display isis interface
Syntax
display isis interface [ verbose ] [ process-id ]
View
Any view
Parameters
verbose: Displays IS-IS interface detail information.
process-id: IS-IS process ID, in the range of 1 to 65535.
Description
Use the display isis interface command to display IS-IS interface information.
The information displayed by this command includes interface name, interface IP
address, interface link state and so on. Besides all the information displayed by display
isis interface, using the display isis interface verbose command displays other
interface related information, such as CSNP packets broadcast intervals, Hello packets
broadcast intervals and the number of invalid Hello packets.
To Next Page
Loading...
Need help?
General
