H3C S7500E Series

Command Manual – IP Addressing and Performance
H3C S7500E Series Ethernet Switches
Chapter 1 IP Addressing Configuration
Commands
1-3
Field Description
ICMP packet input number: 0
Echo reply: 0
Unreachable: 0
Source quench: 0
Routing redirect: 0
Echo request: 0
Router advert: 0
Router solicit: 0
Time exceed: 0
IP header bad: 0
Timestamp request: 0
Timestamp reply: 0
Information request: 0
Information reply: 0
Netmask request: 0
Netmask reply: 0
Unknown type: 0
Total number of ICMP packets received on an
interface, including the following packets:
z Echo reply packet
z Unreachable packets
z Source quench packets
z Routing redirect packets
z Echo request packets
z Router advertisement packets
z Router solicitation packets
z Time exceeded packets
z IP header bad packets
z Timestamp request packets
z Timestamp reply packets
z Information request packets
z Information reply packets
z Netmask request packets
z Netmask reply packets
z Unknown type packets
DHCP packet deal mode
DHCP packet processing mode. This field
appears on a DHCP-supporting device and can
be one of the following values:
z global: The DHCP server with the global
address pool is enabled on the interface.
z relay: The DHCP relay agent is enabled on
the interface.
1.1.2 display ip interface brief
Syntax
display ip interface brief [ interface-type [ interface-number ] ]
View
Any view
Parameters
interface-type: Interface type.
interface-number: Interface number.
Description
Use the display ip interface brief command to display brief information about a
specified or all layer 3 interfaces.