H3C S7500E Series Command Manual

Command Manual – DHCP
H3C S7500E Series Ethernet Switches
Chapter 2 DHCP Relay Agent Configuration
Commands
2-11
Table 2-1 Description on fields of the display dhcp relay all command
Field Description
Interface name Interface name
Server-group DHCP server group number correlated to the interface.
2.1.14 display dhcp relay security
Syntax
display dhcp relay security [ ip-address | dynamic | static ]
View
Any view
Parameters
ip-address: Displays the binding information of an IP address.
dynamic: Displays information about dynamic bindings.
static: Displays information about static bindings.
Description
Use the display dhcp relay security command to display information about bindings
of DHCP relay agents. If no parameter is specified, information about all bindings will
be displayed.
Examples
# Display information about all bindings.
<Sysname> display dhcp relay security
IP Address MAC Address Type Interface
10.1.1.5 00e0-0000-0000 Static Vlan2
10.10.1.2 0002-0002-0002 Static N/A
--- 2 dhcp-security item(s) found ---
Table 2-2 Description on fields of the display dhcp relay security command
Field Description
IP Address Client IP address
MAC Address Client MAC address

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English