H3C S7500E Series

Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches Chapter 1 IPv6 Basics Configuration Commands
1-17
Field Description
Received packets:
Total: 0
checksum error: 0 too short:
0
bad code 0
unreached: 0 too big:
0
hopcount exceeded: 0 reassembly
timeout: 0
parameter problem: 0 unknown
error type: 0
echoed: 0 echo replied:
0
neighbor solicit: 0 neighbor
advert: 0
router solicit: 0 router advert
0
redirected: 0
router renumbering 0
unknown info type: 0
Deliver failed:
bad length: 0 ratelimited:
0
Statistics of received IPv6 ICMP
packets, including
z Total number of received packets
z Number of packets with checksum
errors
z Number of too small packets
z Number of packets with error codes
z Number of packets whose
destination is unreachable
z Number of too large packets
z Number of packets exceeding the
hop limit
z Number of packets whose
fragmentation and reassembly times
out
z Number of packets with parameter
errors
z Number of packets with unknown
errors
z Number of request packets
z Number of response packets
z Number of neighbor solicitation
messages
z Number of neighbor advertisement
packets
z Number of router solicitation packets
z Number of router advertisement
packets
z Number of redirected packets
z Number of packets recounted by the
router
z Number of unknown type of packets
z Number of packets with a incorrect
size
z Number of packets failing to be
received because of rate limitation
1.1.11 display tcp ipv6 statistics
Syntax
display tcp ipv6 statistics
View
Any view