H3C S7500E Series

Command Manual – ARP
H3C S7500E Series Ethernet Switches Chapter 1 ARP Configuration Commands
1-8
1.2.2 gratuitous-arp-learning enable
Syntax
gratuitous-arp-learning enable
undo gratuitous-arp-learning enable
View
System view
Parameters
None
Description
Use the gratuitous-arp-learning enable command to enable the gratuitous ARP
packet learning function.
Use the undo gratuitous-arp-learning enable command to disable the function.
By default, the function is enabled.
Examples
# Disable the gratuitous ARP packet learning function.
<Sysname> system-view
[Sysname] undo gratuitous-arp-learning enable
1.3 ARP Source Suppression Configuration Commands
1.3.1 arp source-suppression enable
Syntax
arp source-suppression enable
undo arp source-suppression enable
View
System view
Parameters
None
Description
Use the arp source-suppression enable command to enable the ARP source
suppression function.
Use the undo arp source-suppression enable command to disable the function.