H3C S7500E Series

Command Manual – PoE
H3C S7500E Series Ethernet Switches Chapter 1 PoE Configuration Commands
1-28
1.1.21 poe max-power
Syntax
poe max-power max-power
undo poe max-power
View
PoE interface view, PoE-profile file view
Parameters
max-power: Maximum power in milliwatts allocated to a PoE interface, in the range
1000 to 15400.
Description
Use the poe max-power command to configure the maximum power for a PoE
interface.
Use the undo poe max-power command to restore the default.
By default, the maximum power of the PoE interface is 15,400 milliwatts.
Examples
# Set the maximum power of Ethernet 2/0/2 to 12,000 milliwatts.
<Sysname> system-view
[Sysname] interface Ethernet 2/0/2
[Sysname-Ethernet2/0/2] poe max-power 12000
# Set the maximum power of Ethernet 2/0/2 to 12,000 milliwatts through a PoE
configuration file.
<Sysname> system-view
[Sysname] poe-profile abc
[Sysname-poe-profile-abc-1] poe max-power 12000
[Sysname-poe-profile-abc-1] quit
[Sysname] interface Ethernet 2/0/2
[Sysname-Ethernet2/0/2] apply poe-profile name abc
1.1.22 poe max-power (system view)
Syntax
poe max-power max-power [ pse pse-id ]
undo poe max-power [ pse pse-id ]