H3C S7500E Series

Command Manual – QoS
H3C S7500E Series Ethernet Switches Chapter 2 QoS Policy Configuration Commands
2-1
Chapter 2 QoS Policy Configuration Commands
2.1 Commands for Defining Classes
2.1.1 display traffic classifier
Syntax
display traffic classifier user-defined [ classifier-name ]
View
Any view
Parameters
classifier-name: Class name.
Description
Use the display traffic classifier command to display the information about a class.
If no class name is provided, this command displays the information about all the
user-defined classes.
Examples
# Display the information about the user-defined classes.
<Sysname> display traffic classifier user-defined
User Defined Classifier Information:
Classifier: p
Operator: AND
Rule(s) : If-match acl 2001
Table 2-1 Description on the fields of the display traffic classifier user-defined
command
Field Description
User Defined Classifier
Information
The information about the user-defined classes is
displayed.
Classifier
Class name and its contents, which could be of
multiple types
Operator Logical relationship among the classification rules
Rule Classification rules