To Next Page

To Previous Page

Command Manual – System Maintaining and Debugging

H3C S7500E Series Ethernet Switches Chapter 3 Device Management Commands

3-12

3.1.12 display switch-mode status

Syntax

display switch-mode status

View

Any view

Parameters

None

Description

Use the display switch-mode status command to view the current traffic forwarding

mode or working mode of all cards on the switch.

Examples

# View the current traffic forwarding mode or working mode of all cards on the switch.

<Sysname> display switch-mode status

Slot No. Switch-Mode

0 STANDARD-ROUTING

2 ROUTING

3 NONE

Table 3-6 Description on the fields of the display switch-mode status command

Field Description

Slot No. Card slot number

Switch-Mode Traffic forwarding mode or working mode of a card

STANDARD-ROUTING

Standard forwarding mode with the route extension

function

ROUTING Route extension mode

NONE This card is not an EA LPU.

3.1.13 display transceiver alarm interface

Syntax

display transceiver alarm interface [ interface-type interface-number ]

View

Any view

H3C S7500E Series Command Manual

Other manuals for H3C S7500E Series