H3C S7500E Series Command Manual

Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches Chapter 2 RMON Configuration Commands
2-1
Chapter 2 RMON Configuration Commands
2.1 RMON Configuration Commands
2.1.1 display rmon alarm
Syntax
display rmon alarm [ entry-number ]
View
Any view
Parameters
entry-number: Index of an RMON alarm entry, in the range 1 to 65535. If no entry is
specified, the configuration of all alarm entries is displayed.
Description
Use the display rmon alarm command to display the configuration of the specified or
all RMON alarm entries.
Related commands: rmon alarm.
Examples
# Display the configuration of all RMON alarm table entries.
<Sysname> display rmon alarm
Alarm table 1 owned by user1 is VALID.
Samples type : absolute
Variable formula : 1.3.6.1.2.1.16.1.1.1.4.1<etherStatsOctets.1>
Sampling interval : 10(sec)
Rising threshold : 50(linked with event 1)
Falling threshold : 5(linked with event 2)
When startup enables : risingOrFallingAlarm
Latest value : 0
Table 2-1 Description on the fields of the display rmon alarm command
Field Description
Alarm table Alarm entry index, 1 in this example
owned by Owner of the entry, user1 in this example

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English