H3C S7500E Series Command Manual

Command Manual – Information Center
H3C S7500E Series Ethernet Switches
Chapter 1 Information Center Configuration
Commands
1-7
Examples
# Display the state of the log buffer and the log information recorded on the device.
<Sysname> display logbuffer
Logging buffer configuration and contents:enabled
Allowed max buffer size : 1024
Actual buffer size : 512
Channel number : 4 , Channel name : logbuffer
Dropped messages : 0
Overwritten messages : 0
Current messages : 6
%Apr 26 17:50:00:681 2007 H3C DEV/4/FAN ABSENT:
Fan 1 is absent.
......Omitted......
Table 1-6 Descriptions on the fields of the display logbuffer command
Field Description
Logging buffer configuration
and contents
Indicates the current state of the log buffer and its
contents, which could be enabled or disabled.
Allowed max buffer size The maximum buffer size allowed
Actual buffer size The actual buffer size
Channel number The channel number of the log buffer, defaults to 4
Channel name
The channel name of the log buffer, defaults to
logbuffer
Dropped messages The number of dropped messages
Overwritten messages
The number of overwritten messages (when the
buffer size is not big enough to hold all messages,
the latest messages overwrite the old ones).
Current messages The number of the current messages
1.1.4 display logbuffer summary
Syntax
display logbuffer summary [ level severity | slot slotnum ] *
View
Any view

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English