H3C S7500E Series Command Manual

Command Manual – QoS
H3C S7500E Series Ethernet Switches Chapter 2 QoS Policy Configuration Commands
2-15
Keyword DSCP value (binary) DSCP value (decimal)
cs7 111000 56
ef 101110 46
Description
Use the remark dscp command to configure the action of setting DSCP precedence
for a traffic behavior.
Use the undo remark dscp command to remove the action of setting DSCP
precedence.
Related commands: qos policy, traffic behavior, classifier behavior.
Examples
# Configure the action to set DSCP precedence to 6 for a traffic behavior.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark dscp 6
2.2.11 remark ip-precedence
Syntax
remark ip-precedence ip-precedence-value
undo remark ip-precedence
View
Traffic behavior view
Parameters
ip-precedence-value: IP precedence to be set for packets, in the range of 0 to 7.
Description
Use the remark ip-precedence command to configure the action of setting IP
precedence for a traffic behavior.
Use the undo remark ip-precedence command to remove the action of setting IP
precedence.
Related commands: qos policy, traffic behavior, classifier behavior.
Examples
# Configure the action to set IP precedence to 6 for a traffic behavior.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English