H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches Chapter 4 PIM Configuration Commands
4-17
Field Description
Join/Prune Join/prune messages
State Refresh State refresh messages
BSR Bootstrap messages
C-RP C-RP-Adv messages
4.1.18 display pim grafts
Syntax
display pim grafts
View
Any view
Parameters
None
Description
Use the display pim grafts command to view the information about unacknowledged
graft messages.
Examples
# View the information about unacknowledged graft messages.
<Sysname> display pim grafts
Source Group Age RetransmitIn
192.168.10.1 224.1.1.1 00:00:24 00:00:02
Table 4-4 Description on the fields of the display pim grafts command
Field Description
Source Multicast source address in the graft message
Group Multicast group address in the graft message
Age
Time in which the graft message will get aged out, in
hours:minutes:seconds
RetransmitIn
Time in which the graft message will be retransmitted, in
hours:minutes:seconds

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English