H3C S7500E Series Command Manual

Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches Chapter 1 IPv6 Basics Configuration Commands
1-39
1.1.38 reset ipv6 neighbors
Syntax
reset ipv6 neighbors { all | dynamic | interface interface-type interface-number | slot
slot-number | static }
View
User view
Parameters
all: Clears the static and dynamic neighbor information on all interfaces.
dynamic: Clears the dynamic neighbor information on all interfaces.
interface interface-type interface-number: Clears dynamic neighbor information on a
specified interface.
slot slot-number: Clears the dynamic neighbor information on a specified slot.
static: Clears the static neighbor information on all interfaces.
Description
Use the reset ipv6 neighbors command to clear IPv6 neighbor information.
Examples
# Clear neighbor information on all interfaces.
<Sysname> reset ipv6 neighbors all
1.1.39 reset ipv6 pathmtu
Syntax
reset ipv6 pathmtu { all | static | dynamic }
View
User view
Parameters
all: Clears all PMTUs.
static: Clears all static PMTUs.
dynamic: Clears all dynamic PMTUs.
Description
Use the reset ipv6 pathmtu the command to clear the PMTU information.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English