H3C S7500E Series Command Manual

Command Manual – File System Management
H3C S7500E Series Ethernet Switches Chapter 2 FTP Configuration Commands
2-3
Note that if the user to be released is transmitting a file, the connection between the
user and the FTP server is terminated after the file transmission.
Examples
# Manually release the FTP connection established with username of ftpuser.
<Sysname> free ftp user ftpuser
Are you sure to free FTP user ftpuser? [Y/N]:y
<Sysname>
2.1.4 ftp server enable
Syntax
ftp server enable
undo ftp server
View
System view
Parameters
None
Description
Use the ftp server enable command to enable the FTP server.
Use the undo ftp server command to disable the FTP server.
By default, the FTP server is disabled to prevent attacks.
Examples
# Disable the FTP server.
<Sysname> system-view
[Sysname] undo ftp server
% Close FTP server
2.1.5 ftp timeout
Syntax
ftp timeout minute
undo ftp timeout
View
System view

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English