H3C S7500E Series

Command Manual – QoS
H3C S7500E Series Ethernet Switches
Chapter 3 Congestion Management Configuration
Commands
3-1
Chapter 3 Congestion Management Configuration
Commands
3.1 Congestion Management Configuration Commands
3.1.1 display qos sp interface
Syntax
display qos sp interface [ interface-type interface-number ]
View
Any view
Parameters
interface-type: Port type.
interface-number: Port number.
Description
Use the display qos sp interface command to display the strict priority (SP) queuing
configuration on a specified port.
If no port is specified, this command displays the SP queuing configuration on all ports.
Related commands: qos sp.
Examples
# Display the SP queuing configuration on Ethernet 2/0/1.
<Sysname> display qos sp interface Ethernet 2/0/1
Interface: Ethernet2/0/1
Output queue: Strict-priority queue
3.1.2 display qos wrr interface
Syntax
display qos wrr interface [ interface-type interface-number ]
View
Any view