H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 5 IPv6 BGP Configuration Commands
5-21
Duration : 00:13:47 Reuse : 00:16:36
Path/Ogn : 200?
Table 5-8 Description on the fields of the display bgp ipv6 routing-table flap-info
command
Field Description
Flaps Number of flaps
Duration Flap duration
Reuse Reuse time of the route
Refer to
Table 5-5 for description on the fields above.
5.1.22 display bgp ipv6 routing-table peer
Syntax
display bgp ipv6 routing-table peer ipv6-address { advertised-routes |
received-routes } [ network-address prefix-length | statistic ]
View
Any view
Parameters
ipv6-address: Specifies the IPv6 peer to be displayed.
advertised-routes: Routing information advertised to the specified peer.
received-routes: Routing information received from the specified peer.
network-address prefix-length: IPv6 address and prefix length. The prefix length
ranges from 0 to 128.
statistic: Displays route statistics.
Description
Use the display bgp ipv6 routing-table peer command to display the routing
information advertised to or received from the specified IPv6 BGP peer.
Examples
# Display the routing information advertised to the specified BGP peer.
<Sysname> display bgp ipv6 routing-table peer 10:10::10:1 advertised-routes
Total Number of Routes: 2
BGP Local router ID is 20.20.20.1
Status codes: * - valid, > - best, d - damped,

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English