H3C S7500E Series Command Manual

Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches Chapter 2 RMON Configuration Commands
2-6
Field Description
broadcastpackets
Number of broadcasts received during the sampling
period
multicastpackets
Number of multicasts received during the sampling
period
CRC alignment errors
Number of packets received with CRC alignment errors
during the sampling period
undersize packets
Number of undersize packets received during the
sampling period
oversize packets
Number of oversize packets received during the
sampling period
fragments
Number of fragments received during the sampling
period
jabbers Number of jabbers received during the sampling period
collisions
Number of colliding packets received during the
sampling period
utilization Bandwidth utilization during the sampling period
2.1.5 display rmon prialarm
Syntax
display rmon prialarm [ entry-number ]
View
Any view
Parameters
entry-number: Private alarm entry index, in the range 1 to 65535. If no entry is specified,
the configuration of all private alarm entries is displayed.
Description
Use the display rmon prialarm command to display the configuration of the specified
or all private alarm entries.
Related commands: rmon prialarm.
Examples
# Display the configuration of all private alarm entries.
<Sysname> display rmon prialarm
Prialarm table 5 owned by user1 is UNDERCREATION.
Samples type : changeratio

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English