H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches Chapter 1 IGMP Snooping Configuration Commands
1-2
Router port(s):total 1 port.
Eth1/0/2 (D) ( 00:01:30 )
IP group(s):the following ip group(s) match to one mac group.
IP group address:224.1.1.1
(1.1.1.1, 224.1.1.1):
Attribute: Host Port
Host port(s):total 1 port.
Eth1/0/1 (D) ( 00:03:23 )
MAC group(s):
MAC group address:0100-5e01-0101
Host port(s):total 1 port.
Eth1/0/1
Table 1-1 Description of the fields of the display igmp-snooping group command
Field Description
Total 1 IP Group(s). Total number of IP multicast groups
Total 1 IP Source(s). Total number of multicast sources
Total 1 MAC Group(s). Total number of MAC multicast groups
Port flags: D-Dynamic port,
S-Static port, A-Aggregation
port, C-Copy port
Port flags: D for dynamic port, S for static port, A for
aggregation port, C for port copied from a (*, G)
entry to an (S, G) entry
Subvlan flags: R-Real VLAN,
C-Copy VLAN
Sub-VLAN flags: R for real egress sub-VLAN
under the current entry, C for sub-VLAN copied
from a (*, G) entry to an (S, G) entry
Router port(s) Number of router ports
IP group address Address of IP multicast group
MAC group address Address of MAC multicast group
Attribute Attribute of IP multicast group
Host port(s) Number of host member ports
1.1.2 display igmp-snooping statistics
Syntax
display igmp-snooping statistics
View
Any view

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English