Command Manual – Portal
H3C S7500E Series Ethernet Switches Chapter 1 Portal Configuration Commands
1-7
Field Description
Destination Destination information in the portal-free rule
IP Destination IP address in the portal-free rule
Mask Subnet mask of the destination IP address in the portal-free rule
1.1.4 display portal interface
Syntax
display portal interface interface-type interface-number
View
Any view
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Description
Use the display portal interface command to display the portal configuration of an
interface.
Examples
# Display the portal configuration of interface Vlan-interface 2.
<Sysname> display portal interface Vlan-interface 2
Interface portal configuration:
Vlan-interface 2: Portal running
Portal server: servername
Authentication type: Direct
Authentication network:
address = 0.0.0.0 mask = 0.0.0.0
Table 1-4 Description on the fields of the display portal interface command
Field Description
Interface portal configuration Portal configuration on the interface
Vlan-interface 2 Status of the portal feature on the interface
Portal server Portal server referenced by the interface
Authentication type Authentication mode enabled on the interface
Authentication network Information of the portal authentication subnet
address IP address of the portal authentication subnet
To Next Page
Loading...
Need help?
General
