H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches Chapter 1 IGMP Snooping Configuration Commands
1-20
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping router-aging-time 100
1.1.22 igmp-snooping source-deny
Syntax
igmp-snooping source-deny
undo igmp-snooping source-deny
View
Ethernet interface view, port group view
Parameters
None
Description
Use the igmp-snooping source-deny command to enable multicast source port
filtering.
Use the undo igmp-snooping source-deny command to disable multicast source
port filtering.
By default, multicast source port filtering is disabled.
This command works on IGMP Snooping–enabled VLANs and VLANs with IGMP
enabled on the corresponding VLAN interfaces.
Examples
# Enable source port filtering for multicast data on Ethernet 2/0/1.
<Sysname> system-view
[Sysname] interface ethernet 2/0/1
[Sysname-Ethernet2/0/1] igmp-snooping source-deny
1.1.23 igmp-snooping special-query source-ip
Syntax
igmp-snooping special-query source-ip { current-interface | ip-address }
undo igmp-snooping special-query source-ip
View
VLAN view

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English