H3C S7500E Series Command Manual

Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches Chapter 1 SNMP Configuration Commands
1-17
Examples
# Create a MIB view mibtest, which includes all objects of the subtree mib-2.
<Sysname> system-view
[Sysname] snmp-agent mib-view included mibtest 1.3.6.1
1.1.17 snmp-agent packet max-size
Syntax
snmp-agent packet max-size byte-count
undo snmp-agent packet max-size
View
System view
Parameters
byte-count: Maximum number of bytes of an SNMP packet that can be received or sent
by an agent, in the range 484 to 17,940. The default value is 1,500 bytes.
Description
Use the snmp-agent packet max-size command to configure the maximum number of
bytes in an SNMP packet that can be received or sent by an agent.
Use the undo snmp-agent packet max-size command to restore the default packet
size.
Examples
# Configure the maximum number of bytes that can be received or sent by an SNMP
agent as 1,042 bytes.
<Sysname> system-view
[Sysname] snmp-agent packet max-size 1042
1.1.18 snmp-agent sys-info
Syntax
snmp-agent sys-info { contact sys-contact | location sys-location | version { all | { v1
| v2c | v3 }* } }
undo snmp-agent sys-info { contact | location | version { all | { v1 | v2c | v3 }* } }
View
System view

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English