H3C S7500E Series Command Manual

Command Manual – ARP
H3C S7500E Series Ethernet Switches Chapter 2 Proxy ARP Configuration Commands
2-2
Parameters
None
Description
Use the local-proxy-arp enable command to enable local proxy ARP.
Use the undo local-proxy-arp enable command to disable local proxy ARP.
By default, local proxy ARP is disabled.
Related commands: display local-proxy-arp.
Examples
# Enable local proxy ARP on VLAN-interface 2.
<Sysname> system-view
[Sysname] interface Vlan-interface 2
[Sysname-Vlan-interface2] local-proxy-arp enable
2.1.3 display proxy-arp
Syntax
display proxy-arp [ interface Vlan-interface vlan-id ]
View
Any view
Parameters
interface Vlan-interface vlan-id: Displays the proxy ARP status of the VLAN interface
specified by the argument vlan-id.
Description
Use the display proxy-arp command to display the proxy ARP status.
Related commands: proxy-arp enable.
Examples
# Display the proxy ARP status on VLAN-interface 1.
<Sysname> display proxy-arp interface vlan-interface 1
Interface Vlan-interface1
Proxy ARP status: disabled

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English